Differences

This shows you the differences between two versions of the page.

--- documents:acm-4000 [2023/01/17 15:07]
nsirianni
+++ documents:acm-4000 [2023/01/19 14:58] (current)
nsirianni
@@ Line 101: / Line 101: @@
 ==== - Power Requirement ====
-System power requirement is 10-32VDC, 3 amps max. **PENDING TESTING**
+System power requirement is 10-32VDC, 3 amps max.
 ==== - Operating Temperature ====
 Ambient temperature range:
-–40°C to +85°C (–40°F to +185°F) **PENDING TESTING**
+–40°C to +85°C (–40°F to +185°F)
-==== - Certifications ====
-The ACM-4000 System is CSA- and UL-certified for use in Class **PENDING**, Division **PENDING**,
-Groups **PENDING** and **PENDING** hazardous locations.
-===== - AFR-500 =====
-For full AFR-500 documentation this information can be found at [[documents:afr-500|AFR-500 Documentation]]
-==== -  DUAL BANK ====
-With an ACM-4000 mounted all that is required to use the ACM is input power to the board, and to connect the ethernet ports of each AFR-500 board to any of the three ethernet ports on the ACM-4000. If using a display, connect an HDMI cable from either of the HDMI ports on the ACM-4000 to the HDMI port of the display. When the display is also a touch screen connect a USB cable from any of the USB ports on the ACM-4000 to the USB port of the touch screen display.
-==== -  DE-4000 BANK ====
-Single Eth port (gig bit)
-Right most HDMI (HDMI 1)