Differences

This shows you the differences between two versions of the page.

--- documents:de4000:de4000operate [2023/05/15 12:32]
twebster [14.2 General]
+++ documents:de4000:de4000operate [2023/05/15 13:05] (current)
twebster [8.1 Trends]
@@ Line 529: / Line 529: @@
 {{ :documents:de4000:channeltrends.png?nolink |}}
+=== - Advance Trending & Data Logging  ===
+NOTE: This feature requires an ACM4000 be installed alongside the DE4000.
+In Firmware version 3.0.0 and above the standard Trending shown in section 8.1 is replaced with a link to the Altronic Data Explorer(ADE) hosted on an ACM4000 system. Note when showing the ADE the Left side buttons are covered up so the Close button will appear where the Settings gear button usually is. Pressing this will close the ADE and show the left side buttons and the dashboard home page.
+{{ :documents:de4000:advtrend.jpg?nolink&1000 |}}
+If you don't have an ACM4000 in the system then the Advanced Trending and Data Logging can be disabled by setting a Virtual Channel in the Master Script.
+{{ :documents:de4000:advtrendenable.jpg?nolink&600 |}}
+If an ACM4000 is added later the Advanced Trending and Data Logging can be enabled again by setting the virtual channel to "0".
+{{ :documents:de4000:advtrendDisable.jpg?nolink&600 |}}
 ===== - EVENTS =====
@@ Line 1730: / Line 1745: @@
 on the back of the HMI Display Module.
-o Click the On-Screen Keyboard switch to turn the On-Screen Keyboard ON
+o Click the On-Screen Keyboard switch to turn the On-Screen Keyboard ON or OFF.
-or OFF.
 **• Auto-Scale —** The Auto-scale is used to stretch the DE4000 User Interface on HMIs larger then 8 inches. With this enabled it will also stretch to fit the browser window when connected through a Laptop.
@@ Line 1745: / Line 1759: @@
 software version levels or rev levels loaded into each component of the DE-4000 system. If not logged in as Admin the standard System Information page will display the current firmware revisions on all boards and the Current Web Application revision loaded on the SOM. If logged in as Admin the Firmware Update page will display with the interface to allow for updating Firmware revisions on the boards as well as updating the Web Application on the SOM. See Below for instructions on updating firmware.
-None Admin:{{ :documents:de4000:sysinfo-old.jpg?nolink&800  |}} Admin:{{ :documents:de4000:bl-no-usb.jpg?nolink&805 |}}
+Non-Admin:{{ :documents:de4000:sysinfo-old.jpg?nolink&800  |}} Admin:{{ :documents:de4000:bl-no-usb.jpg?nolink&805 |}}
 o **Web Application —** The SOM and Web App Firmware